1. How long will it take?

With the high-pressure equipment we use it takes a fraction of the time that would be required by a domestic jet-washer. The high-tech design of our low level rotary cleaner keeps the mess under control and away from adjacent areas. Areas of 200 to 400 square metres can be completed in a day, although a follow up visit may be required to brush in the sand. If the application of a sealant is ordered this normally requires a second visit to apply the sealant.

2. How much will it cost for cleaning and if required re-sanding?

This depends on the surface area to be cleaned and for driveways and as an example an average 2-car driveway will cost in the region of £100.00 for cleaning.
There is however a minimum charge of £99.00

3. How long does the sealing last?

Depending on local conditions, the acrylic sealant last 1 to 3 years between re-treatments and the pre-polymer urethane sealant typically double this time. Routine regular light rinsing helps to prolong the condition of the surface. If you would like a regular maintenance visit from HLS please contact us.

4. Are oil stains completely removed?

In most cases they can be nearly completely removed, but in severe cases where the stains have been in place a long time it may be necessary to treat the area with a sealant after cleaning, to blend out any small residual stains.